Makefile.master

#
#ident	"@(#)Makefile.master	1.71	95/07/16 SMI"
#
# Copyright (c) 1993 by Sun Microsystems, Inc.
#
# Makefile.master, global definitions for system source
#
ROOT=		/proto

# CH toggles operations restricted to root. It is normally set to `#'. When
# running as root, it should be set to `' (null).
#
# RELEASE_BUILD should be cleared for final release builds. This is completely
# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies.
#
# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls
# identification strings. Enabling RELEASE_BUILD automatically enables
# INTERNAL_RELEASE_BUILD.
#
# STRIP_COMMENTS toggles comment section striping. Generally the same setting
# as INTERNAL_RELEASE_BUILD.
#
# BUILD_PROFS toggles the building of profiled libraries. Again, generally
# the same setting as INTERNAL_RELEASE_BUILD.
#
# STRIPFLAG is similar. It is set to a unique value depending upon the
# value of CH. It is set here for use in lower level Makefiles to allow
# a single point change to effect the entire build.
#
CH:sh=					echo \\043

NOT_RELEASE_BUILD=
INTERNAL_RELEASE_BUILD:sh=		echo \\043
RELEASE_BUILD:sh=			echo \\043
$(RELEASE_BUILD)NOT_RELEASE_BUILD:sh=	echo \\043
$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD=

STRIP_COMMENTS=	$(INTERNAL_RELEASE_BUILD)
BUILD_PROFS=	$(INTERNAL_RELEASE_BUILD)

STRIPFLAG=
$(CH)STRIPFLAG=	-s

RPCGEN=		rpcgen
ECHO=		echo
INS=		install
SYMLINK=	ln -s
LN=		ln
CHMOD=		chmod
CHOWN=		$(ECHO)
$(CH)CHOWN=	chown -h
CHGRP=		$(ECHO)
$(CH)CHGRP=	chgrp -h
MV=		mv -f
RM=		rm -f
MCS=		mcs

FILEMODE=	644
DIRMODE=	755
OWNER=		bin
GROUP=		bin

# Declare that nothing should be built in parallel.
# Individual Makefiles can use the .PARALLEL target to declare otherwise.
.NO_PARALLEL:

# For stylistic checks
#
# Note that the X and C checks are not used at this time and may need
# modification when they are actually used.
#
CSTYLE=		cstyle
CSTYLE_TAIL=
HDRCHK=		hdrchk
HDRCHK_TAIL=

DOT_H_CHECK=	\
	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \
	$(HDRCHK) $< $(HDRCHK_TAIL)

DOT_X_CHECK=	\
	@$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \
	$(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL)

DOT_C_CHECK=	\
	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL)

# modified for use within NSE environments
#
INS.file=	$(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $<
$(CH)INS.file=	$(INS) -s -m $(FILEMODE) -u $(OWNER) -g $(GROUP) -f $(@D) $<
INS.dir=	$(INS) -s -d -m $(DIRMODE) $@
$(CH)INS.dir=	$(INS) -s -d -m $(DIRMODE) -u $(OWNER) -g $(GROUP) $@
# installs and renames at once
#
INS.rename=	$(INS.file); $(MV) $(@D)/$(<F) $@

# MACH must be set in the shell environment per uname -p on the build host
# More specific architecture variables should be set in lower makefiles.

# In most places, assignments to these macros should be appended with +=
# (CPPFLAGS.master allows values to be prepended to CPPFLAGS).
# Optimization is toggleable in lower level makefiles via the COPTFLAG macro.
#
sparc_CFLAGS=	-xcg89 -Wa,-cg92
i386_CFLAGS=
COPTFLAG=       -O
CFLAGS=         $(COPTFLAG) $($(MACH)_CFLAGS)
DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\"	# For messaging.
CPPFLAGS.master=$(DTEXTDOM) \
	$(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4)
CPPFLAGS=	$(CPPFLAGS.master)
AS_CPPFLAGS=	$(CPPFLAGS.master)

#
# For source message catalogue
#
.SUFFIXES: $(SUFFIXES) .po
MSGROOT= $(ROOT)/catalog
MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN)
CLOBBERFILES += $(POFILE) $(POFILES)
COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS)
XGETTEXT= xgettext
XGETFLAGS= -c TRANSLATION_NOTE
BUILD.po= $(XGETTEXT) $(XGETFLAGS) $<.i ;\
	$(RM)	$@ ;\
	sed "/^domain/d" < messages.po  > $@ ;\
	$(RM) messages.po $<.i
#
# This is overwritten by local Makefile when PROG is a list.
#
POFILE= $(PROG).po


# The C++ translation system (can't bring myself to call it a compiler),
# doesn't understand the ANSI and K&R C keyword "signed". The following
# flag settings silence warnings about this. Hopefully, this will be fixed.
#
sparc_CCFLAGS=	-cg89 -Qoption fbe -cg92
i386_CCFLAGS=
CCOPTFLAG=	-O
CCFLAGS=	$(CCOPTFLAG) -Dsigned= $($(MACH)_CCFLAGS)

# Define compilation macros.
#
COMPILE.c=	$(CC) $(CFLAGS) $(CPPFLAGS) -c
COMPILE.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) -c
COMPILE.s=	$(AS) $(ASFLAGS) $(AS_CPPFLAGS)
LINK.c=		$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
LINK.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) $(LDFLAGS)
LINT.c=		$(LINT) $(LINTFLAGS) $(CPPFLAGS)

# Define native compilation macros
#
sparc_NATIVECC= /opt/SUNWspro/bin/cc
i386_NATIVECC=  /opt/SUNWspro/bin/cc
NATIVECC= $($(MACH)_NATIVECC)

# Pass -Y flag to cpp (method of which is release-dependent)
CCYFLAG=	-Y I,

# Rules (normally from make.rules) and macros which are used for post
# processing files. Normally, these do stripping of the comment section
# automatically.
#    RELEASE_CM:	Should be editted to reflect the release.
#    POST_PROCESS_O:	Post-processing for `.o' files.
#    POST_PROCESS_A:	Post-processing for `.a' files (currently null).
#    POST_PROCESS_SO:	Post-processing for `.so' files.
#    POST_PROCESS:	Post-processing for executable files (no suffix).
# Note that these macros are not completely generalized as they are to be
# used with the file name to be processed following.
#
# It is left as an exercise to Release Engineering to embellish the generation
# of the release comment string.
#
#	If this is a standard development build:
#		compress the comment section (mcs -c)
#		add the standard comment (mcs -a $(RELEASE_CM))
#		add the development specific comment (mcs -a $(DEV_CM))
#
#	If this is an installation build:
#		delete the comment section (mcs -d)
#		add the standard comment (mcs -a $(RELEASE_CM))
#		add the development specific comment (mcs -a $(DEV_CM))
#
#	If this is an release build:
#		delete the comment section (mcs -d)
#		add the standard comment (mcs -a $(RELEASE_CM))
#
#	Sigh,... The declaration POUND_SIGN is always '#'. This is just needed
#	to get around the make **bug** that '#' is always a comment delimiter,
#	even when escaped or quoted.
#
# The following list of macros are used in the definition of RELEASE_CM
# which is used to label all binaries in the build:
#
# 	RELEASE		Specific release of the build, eg: 5.2
#	VERSION		Version of the build (alpha, beta, Generic)
#	PATCHID		If this is a patch this value should contain
#			the patchid value (eg: "Generic 100832-01"), otherwise
#			it will be set to $(VERSION)
#	RELEASE_DATE	Date of the Release Build
#	PATCH_DATE	Date the patch was created, if this is blank it
#			will default to the RELEASE_DATE
#
POUND_SIGN:sh=	echo \\043
RELEASE=	5.5
VERSION=	SunOS Development
PATCHID=	$(VERSION)
RELEASE_DATE=	April 1995
PATCH_DATE=	$(RELEASE_DATE)
RELEASE_CM=	"@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)"
DEV_CM=		"@($(POUND_SIGN))SunOS Internal Development: `$(ECHO) $$LOGNAME` `date +%D` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"

#
# SMALL_DEV_CM is used by ufsbootblk, because DEV_CM is too long.
# If you make this much longer, you may break the bootblock.
#
SMALL_DEV_CM=	"`date +%D` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"

PROCESS_COMMENT=		   @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM)
$(STRIP_COMMENTS)PROCESS_COMMENT=  @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM)
$(RELEASE_BUILD)PROCESS_COMMENT=   @?${MCS} -d -a $(RELEASE_CM)

POST_PROCESS_O=		$(PROCESS_COMMENT) $@
POST_PROCESS_A=
POST_PROCESS_SO=	$(PROCESS_COMMENT) $@
POST_PROCESS=		$(PROCESS_COMMENT) $@

#	Default build rules which perform comment section post-processing.
#
.c:
	$(LINK.c) -o $@ $< $(LDLIBS)
	$(POST_PROCESS)
.c.o:
	$(COMPILE.c) $(OUTPUT_OPTION) $<
	$(POST_PROCESS_O)
.c.a:
	$(COMPILE.c) -o $% $<
	$(PROCESS_COMMENT) $%
	$(AR) $(ARFLAGS) $@ $%
	$(RM) $%
.s.o:
	$(COMPILE.s) -o $@ $<
	$(POST_PROCESS_O)
.s.a:
	$(COMPILE.s) -o $% $<
	$(PROCESS_COMMENT) $%
	$(AR) $(ARFLAGS) $@ $%
	$(RM) $%
.cc:
	$(LINK.cc) -o $@ $< $(LDLIBS)
	$(POST_PROCESS)
.cc.o:
	$(COMPILE.cc) $(OUTPUT_OPTION) $<
	$(POST_PROCESS_O)
.cc.a:
	$(COMPILE.cc) -o $% $<
	$(AR) $(ARFLAGS) $@ $%
	$(PROCESS_COMMENT) $%
	$(RM) $%
.y:
	$(YACC.y) $<
	$(LINK.c) -o $@ y.tab.c $(LDLIBS)
	$(POST_PROCESS)
	$(RM) y.tab.c
.y.o:
	$(YACC.y) $<
	$(COMPILE.c) -o $@ y.tab.c
	$(POST_PROCESS_O)
	$(RM) y.tab.c
.l:
	$(RM) $*.c
	$(LEX.l) $< > $*.c
	$(LINK.c) -o $@ $*.c -ll $(LDLIBS)
	$(POST_PROCESS)
	$(RM) $*.c
.l.o:
	$(RM) $*.c
	$(LEX.l) $< > $*.c
	$(COMPILE.c) -o $@ $*.c
	$(POST_PROCESS_O)
	$(RM) $*.c

#
# Rules to create message catalogue files from
#	.c, .y and .l files
#
.c.po:
	$(COMPILE.cpp) $<  > $<.i
	$(BUILD.po)

.y.po:
	yacc -d $<
	$(COMPILE.cpp) y.tab.c  > $<.i
	$(BUILD.po)
	$(RM) y.tab.c 

.l.po:
	lex $<
	$(COMPILE.cpp) lex.yy.c  > $<.i
	$(BUILD.po)
	$(RM) lex.yy.c

#
# Rules to perform stylistic checks
#
.SUFFIXES: $(SUFFIXES) .x .check

.h.check:
	$(DOT_H_CHECK)

.x.check:
	$(DOT_X_CHECK)