Skip to content

Latest commit

 

History

History
executable file
·
19 lines (14 loc) · 654 Bytes

boot-into-recovery.md

File metadata and controls

executable file
·
19 lines (14 loc) · 654 Bytes
Raw

Boot Into Recovery

Before flashing new firmware, you should boot into recovery. After a failed upgrade, Lineage typically boots into recovery automatically. If you've already reboot back into the OS, below are the instructions to get back there:

  1. Plug your phone into a PC and open a terminal, run:
adb devices

You should see a device ID appear, with List of devices attached.

  1. Run:
adb reboot bootloader

You will then boot into the bootloader. Use your volume key to search for Recovery, hit the power key once you're on it.

You should then boot into recovery where you can continue flashing the new firmware.