Replies: 7 comments
-
Try this, 4 Plots x 4 = 16 Threads each at a time in Phase1. If Phase3 times are bad lower threads from 4 --> 3 - global: name: A1 name: A2 |
Beta Was this translation helpful? Give feedback.
-
threads: 2 What about threads and memory? Keep it that way? |
Beta Was this translation helpful? Give feedback.
-
I've just started testing with this profile, try it later with your profile
|
Beta Was this translation helpful? Give feedback.
-
Use a program like hwinfo to track % Free Memory and increase memory_buffer if there is a lot of space left |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Yes, do it the way you had it on first post and if you want increase threads like I had. |
Beta Was this translation helpful? Give feedback.
-
Please use Discussions if this is not pertaining to a software issue. |
Beta Was this translation helpful? Give feedback.
-
Hello, I'm from China. My English is not good. I can't even read the manual of configuration file. I use software to translate
My computer CPU: AMD 5800 8c16t, memory: 48g, SSD: P3600 1.2t * 2, HDD: 8t * 2
Some of my important profiles:
global:
max_ concurrent: 8
jobs:
name: A1
max_plots: 999
farmer_public_key:
pool_public_key:
temporary_directory: E:\ #(this is SSD 1.4T)
temporary2_directory:
destination_directory: H:\ #(this is HDD 8T)
size: 32
bitfield: true
threads: 2
buckets: 128
memory_buffer: 4096
max_concurrent: 4
max_concurrent_with_start_early: 7
stagger_minutes: 10
max_for_phase_1: 2
concurrency_start_early_phase: 4
concurrency_start_early_phase_delay: 0
temporary2_destination_sync: false
name: A2
max_plots: 999
farmer_public_key:
pool_public_key:
temporary_directory: F:\ #(this is SSD 1.4T)
temporary2_directory:
destination_directory: G:\ #(this is HDD 8T)
size: 32
bitfield: true
threads: 2
buckets: 128
memory_buffer: 4096
max_concurrent: 4
max_concurrent_with_start_early: 3
stagger_minutes: 15
max_for_phase_1: 2
concurrency_start_early_phase: 4
concurrency_start_early_phase_delay: 0
temporary2_destination_sync: false
The results I want are:
Job A1 and A2 start plot in turn with an interval of 10 minutes
Finally, A1 carries out 4 plots, A2 carries out 4 plots, a total of 8 plots
Or how can I configure it to give full play to the performance of my computer?
It can realize 10 or 8 plots at the same time?
Beta Was this translation helpful? Give feedback.
All reactions