Skip to content

CircuitSetup/ATM90E32

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

52 Commits
 
 
 
 
 
 
 
 

Repository files navigation

ATM90E32 Arduino Library

This library powers the CircuitSetup Split Single Phase Energy Meter and the 6 Channel Expandable Energy Meter.

Use

Setup

#include <ATM90E32.h>
ATM90E32 energy_meter{};

void setup() {
   energy_meter.begin(CS_pin, lineFreq, PGAGain, VoltageGain, CurrentGainCT1, CurrentGainCT2, CurrentGainCT3);
}

Getting Basic Power Data

A loop to get basic power data:

void loop() {
    voltage1 = energy_meter.GetLineVoltageA();
    voltage2 = energy_meter.GetLineVoltageB();
    voltage3 = energy_meter.GetLineVoltageC();

    CT1 = energy_meter.GetLineCurrentA();
    CT2 = energy_meter.GetLineCurrentB();
    CT3 = energy_meter.GetLineCurrentC();
    
    watts1 = energy_meter.GetActivePowerA();
    watts2 = energy_meter.GetActivePowerB();
    watts3 = energy_meter.GetActivePowerC();
    totalWatts = energy_meter.GetTotalActivePower();
}

Getting Metering Values

The following are other functions for other metering data that the ATM90E32 calculates.

  • GetReactivePowerA()
  • GetReactivePowerB()
  • GetReactivePowerC()
  • GetTotalReactivePower()
  • GetApparentPowerA()
  • GetApparentPowerB()
  • GetApparentPowerC()
  • GetTotalApparentPower()
  • GetPowerFactorA()
  • GetPowerFactorB()
  • GetPowerFactorC()
  • GetTotalPowerFactor()
  • GetPhaseA() //phase angle
  • GetPhaseB()
  • GetPhaseC()
  • GetTotalActiveFundPower()
  • GetTotalActiveHarPower()
  • GetFrequency() //voltage frequency
  • GetTemperature() //chip temperature

Getting Energy Over Time

The following functions get data from the ATM90E32 that is converted to kWh. The registers are cleared once they are read.

  • GetImportEnergy() //forward active energy
  • GetImportReactiveEnergy()
  • GetImportApparentEnergy()
  • GetExportEnergy() //reverse active energy
  • GetExportReactiveEnergy()

System Status

These functions get the raw hex values from the system status registers

  • GetSysStatus0()
  • GetSysStatus1()
  • GetMeterStatus0()
  • GetMeterStatus1()

Getting Any Other Register Value

This function takes the name of any register (defined in ATM90E32.h) and outputs the value

  • GetValueRegister(registerRead)