mcp320x-spin

---

This is a P8X32A/Propeller driver object for the Microchip MCP320x and MCP300x series ADCs

IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.

Salient Features

• SPI connection at 1MHz (P1), up to 1.8MHz (P2)
• Read channels 0..7 (availability dependent on model)
• Read raw ADC counts or voltage
• Set reference voltage (in microvolts) from 2.7v to 5.5v
• Set ADC resolution (explicitly, or implicitly by model number)

Requirements

P1/SPIN1:

• 1 extra core/cog for the PASM SPI engine (none if bytecode engine is used)
• signal.adc.common.spinh (provided by spin-standard-library)

P2/SPIN2:

• p2-spin-standard-library
• signal.adc.common.spin2h (provided by p2-spin-standard-library)

Compiler Compatibility

Processor	Language	Compiler	Backend	Status
P1	SPIN1	FlexSpin (6.8.0)	Bytecode	OK
P1	SPIN1	FlexSpin (6.8.0)	Native/PASM	Runs, but buggy
P2	SPIN2	FlexSpin (6.8.0)	NuCode	Runs, but buggy
P2	SPIN2	FlexSpin (6.8.0)	Native/PASM2	OK

(other versions or toolchains not listed are not supported, and may or may not work)

Hardware compatibility

• Tested with MCP3002, MCP3202, MCP3208

Limitations

• Single-channel models untested
• Differential modes not yet supported
• Models with other than 10 or 12 bit resolution not yet supported