Slimline Raspberry Pi 3 Model B case to attach to Wanhao Duplicator i3 Plus and clones:
- Wanhao Duplicator i3 Plus
- Cocoon Create Touch
- Balco something
- Monoprice something whatsit
This is a work-in-progress. Not everything lines up right just yet.
Layer height: 0.2mm Infill: 10% Supports: No Raft: No
-
Attach the top of the case to your print using the four M3 mounting holes on the left or right gantry, or with zip ties to the unused z-limit switch mounting holes on the right gantry.
-
Place Pi, with the CPU facing the case, inside the case you have mounted.
-
Place bottom of the case over the Pi, lining up the screw holes.
-
Fasten case shut with M2.5 bolts or screws. Larger bolts will damage the PCB on your Pi.